Sunday, November 26, 2006

Electric Floor Heating Systems


New Personal-Pampering Electric Floor Heating Systems Offer Variety of Comfort

Many homeowners love the look of tile, wood, or floating woods but dread stepping out of their soothing shower onto cold tile, especially during those frigid winter months. And many love tile or wood in their kitchens and living areas but worry about their little ones playing and pitter-pattering on cold floors. That’s why so many are opting for electric floor heating systems to warm up their floors.

The installation of electric floor heating is not new: heated floors have been installed under bathroom and kitchen tile in the United States for the past 10 years and the warming products continue to gain popularity. Many in the kitchen and bath industry expect radiant floors to continue to play a big role among homeowners who crave comfort features.

Joan McCloskey, editorial marketing director for Better Homes and Gardens magazine, told homebuilders at the 2003 International Builders Show that warm floors in the bathroom is on the list of must-have comforts. “Our bathrooms set the mood for the day and homeowners want it light, comfortable, and cheerful,” she said. “Toys in this room and the master include heated floors, little refrigerators, steam showers with multiple shower heads, soaking tubs, towel warmers, fireplaces, and coffee nooks.”

These thin electric floor heating mats have been very popular in bathrooms and kitchens for a long time. However, the installation of these systems under carpet and floating floating wood was not practical because they needed to be embedded in a layer of thin-set cement, which you normally don’t use when you install a new carpet or floating wood floor. As a result, very few people would opt for a heated floor under carpet or floating wood. Up until now: Underwriters Laboratory has given the thumbs up to Warmly Yours’ Environ II system, a radiant heating system that can be directly installed under carpets and floating wood floors, without cement.

It is the first time that UL tested and approved a floor warming mat to be installed directly between the pad and the carpet or floating wood. “It’s very easy to install,” said Julia Stalfort from WarmlyYours “You can do it yourself: all you need to do is tape the Environ II system on the underlayment pad then lay the floating wood or carpet over it. It takes a few seconds and your carpet or floating wood is warm.” The heating mat is hardwired to a thermostat with an in-floor temperature sensor taped to the heating mat. The thermostat needs to be wired to a regular 110-volt circuit by an electrician.

In addition to providing warmth, these new floor heating mats are energy efficient. Because it is under the carpet or floating wood and over the foam pad, it provides additional insulation from the cold sub-floor. The Environ II is constructed of an ultra thin heating wire that exists in four layers of foil, quickly and efficiently distributing heat. A 120-square-foot coverage would probably cost about 40 cents a day, on average.

Other benefits of electric floor heating systems include:

Silent operation. There’s no hum or whistle of a forced air system.
Energy savings. Evenly distributed heat from a radiant floor heating system can allow the thermostat to be set two to four degrees less than in a forced-air heating system. This can reduce energy costs by 10 to 40 percent.
A healthier home. Forced air systems can spread dust, pollen, and germs. Dust mites and molds love carpet but don’t like warmth. European research performed in 21 households shows a 50 percent to 80 percent reduction in domestic dust mite populations in the households with radiant floor heating, thereby improving the quality of life (particularly for allergy sufferers).
Even, quiet warmth. Even wood, tile, or uncovered concrete floors can benefit from a radiant system.

Electrical Upgrades for Home Remodelers



The Copper Development Association has some good tips if you are planning home upgrades that may put a heavier load on your home's elctrical system.

Home repair and remodeling projects often require some electrical work. As long as the electrician is on hand, you can usually save the cost of a service call by adding to the job as needed If you haven't planned electrical upgrades, a quick look around your house might convince you that you should. Do you have receptacle outlets overburdened by multi-plug strips? Are your lamps and fixtures connected to extension cords? Does every three-prong plug need a two-prong adapter? These and other warning signs indicate a real need for electrical improvements.

Unfortunately, many homeowners wait until a problem occurs, and only then do they think to call in an electrician. But there's along list of reasons why you should inspect and improve your electrical system—before an accident or service breakdown occurs. Here are a few points to consider, according to the Copper Development Association:

Is your service adequate? Many older homes still operate with seriously outdated 60-amp electrical service—and sometimes with just a few fuses or circuit breakers to protect the entire system. Newer homes often have 100-amp service panels, but even this minimum requirement set by many current codes may fall short of your present or future needs. Consider upgrading service to 200 amps.


Size for extra demand. If you're installing a major electrical appliance, like an electric wall oven, a microwave oven, a double-wide refrigerator or central air-conditioning, you'd better think about the additional power it may need. While a salesman or installer might tell you that your system can handle the load, be smart and ask your electrician for a second opinion.


What's the correct wire size? Electricians often install 14-AWG wiring during renovations, which is adequate for most home uses. But heavier 12-AWG copper wire is a better choice because it's more energy-efficient and you won't have to upgrade all over again if you install appliances or fixtures with greater electrical loads. The cost difference for upgrading to 12-AWG copper wire is minimal. If you're adding a room extension or building a new home, it's a good idea to install 12-AWG wire (or larger, depending on the needs of each circuit).


Consider special needs. Different rooms in a home serve different purposes—an important consideration when you're planning improvements, especially where electrical work is involved. Family rooms, home offices and home theaters generally need more circuits, more outlets, and built-in or plug-in power-surge protection. Outlets in kitchens, baths, garages and outdoor areas require ground-fault circuit interrupters, or GFCIs. And you don't have to wait for a major renovation to add protection—you can install many safety devices yourself, such as outlet caps, switch guards and wire shields in nurseries and children's playrooms.


And finally, don't forget your communications wiring needs—make sure telephone wiring is rated Category 5 or better to assure speedy data mission, high-quality voice service and convenient installation as you add telephone-based services in the future.

Home Wine Cooler




Serve wine at the perfect temperature with this 16-bottle countertop wine cooler. The interior rack can accommodate your larger bottles while the removable chrome shelves let you select any bottle quickly and easily. Maintenance is trouble-free thanks to the convenient automatic defrost feature. This wine cooler is ideal for home use or for the wine enthusiast in your life.

• Variable temperature control allows you to appropriately chill all your wines
• Removable chrome shelves and a rack for larger bottles provide versatility
• Black exterior with an attractive metallic-silver door and stainless-steel handle looks sleek and modern
• Designed to fit on most countertops
• Auto defrost for hassle-free maintenance

It is a great home upgrade and a great gift and it only costs about $129. Check it out at Home Depot.